email | print

Products

Use the search box below to find a product:

 
Related Standards:

	“Quality Control Manual” Template for Manufacturers of Displays and Workstations Labeled for Final Interpretation in Full-Field Digital Ma...
	“Quality Control Manual” Template for Manufacturers of Hardcopy Output Devices Labeled for Final Interpretation in Full-field Digital Mamm...
	1.65-inch (42-mm) for Integral Reflector Rim Reference Projection Lamps with GX5.3 or GY5.3 Bases—Dimensions and Centering Systems
	100-Watt, M90 Single-Ended Metal Halide Lamps
	1000-Watt, M47 Single-Ended Metal Halide Lamps
	150-Watt, M102 Single-Ended Metal-Halide Lamps
	1500-Watt, M48 Single-Ended Metal-Halide Lamps
	160-Watt, 120-Volt B87 Self-Ballasted Mercury Halide Lamps
	175-Watt, M57 Single-Ended Metal Halide Lamps
	2007-DICOM-FULLSET
	250-Watt, M58 Single-Ended Metal Halide Lamps
	250-Watt, M80 Double-Ended Metal Halide Lamps
	34 Watt Fluorescent Lamps And High Frequency Electronic Ballasts
	400-Watt, M59 Single-Ended Metal Halide Lamps
	450W Self-Ballasted Mercury Lamps
	5-46 KV Shielded Power Cable for Use in the Transmission and Distribution of Electric Energy
	50-Watt, M110 Single-Ended Metal-Halide Lamps
	70-Watt, M98 Single-Ended Metal Halide Lamps
	750-Watt, 120-Volt Self-Ballasted Mercury Lamps
	A Guide for the Safe Use of Remote Illumination Systems Equipment, Including a Glossary of Definitions
	A Lighting Systems Division Information Bulletin: Changes to the 2005 NEC Will Impact Future Metal Halide Systems Options
	A Reasoned Approach to Solving Solderability Problems with Tin-Coated and Nickel-Coated Stranded Conductors in High Performance Wire and Cable Applica...
	AC Overload Test for Film Insulated Magnet Wire
	AC Vacuum-Break Magnetic Controllers Rated 1500 Volts AC
	Acoustic Noise Measurement Procedure for Diagnostic Magnetic Resonance Imaging Devices
	Acoustic Output Measurement Standard for Diagnostic Ultrasound Equipment, Revision 3
	Adjustable Speed Electrical Power Drive Systems, Part 1: General Requirements—Rating Specifications for Low Voltage Adjustable Speed D.C. Power ...
	Adjustable Speed Electrical Power Drive Systems, Part 2: General Requirements--Rating Specifications for Low Voltage Adjustable Frequency A.C. Power D...
	Adjustable Speed Electrical Power Drive Systems: Part 4: General Requirements--Rating Specifications for A.C. Power Drive Systems Above 1000 V A.C. an...
	Alternating-Current High-Voltage Circuit Breakers
	American National Standard for Electric Connectors—Connectors for Use Between Aluminum-to-Aluminum or Aluminum-to-Copper Conductors
	American National Standard for Electric Connectors—Non-Sealed, Multiport Connector Systems Rated 600 Volts or Less for Aluminum and Copper Condu...
	American National Standard for Electric Lamps—A, G, PS, and Similar Shapes with E26 Medium Screw Bases
	American National Standard for Electric Lamps—Amendments to ANSI C78.370-1997 and ANSI C78.390-1998
	American National Standard for Electric Lamps—Characteristics of Miniature Lamps of T1 and T1 3/4 Shapes
	American National Standard for Electric Lamps—Classification of the Beam Patterns of Reflector Lamps
	Dimensions for Projection Lamps—Double-Contact, Medium Ring, Base-up Type
	American National Standard for Electric Lamps—Discharge Lamps (Excluding Fluorescent Lamps)—Safety Specifications
	American National Standard for Electric Lamps—High Intensity Discharge—Methods of Measuring Characteristics
	American National Standard for Electric Lamps—High-Intensity Discharge Lamps, Method of Designation (Amendment)
	American National Standard for Electric Lamps—Incandescent Lamps—Safety Specifications—Part 3: Tungsten Halogen Lamps (non vehicle)
	American National Standard for Electric Lamps—Incandescent Lamps—Safety Specifications—Part 1: Tungsten Filament Lamps for Domestic ...
	American National Standard for Electric Lamps—PAR and R Shapes
	American National Standard for Electric Lamps—Projection Lamps—Vocabulary
	American National Standard for Electric Lamps—Incandescent Lamps—Safety Specifications—Part 2: Tungsten Halogen Lamps for Domestic a...
	For Electric Lamps — Single Base Fluorescent Lamps - Dimensional and Electrical Characteristics
	American National Standard for Electric Lamps—Single-Ended Metal Halide Lamps
	Single-Ended TH Lamps with GZ9.5 Bases, T6 Bulb, 36.5mm LCL, 78.2mm MOL, with Prox. Reflector
	American National Standard for Electric Lamps—Specifications for Fluorescent Lamp Starters
	American National Standard for Electric Lamps—Specifications for Performance of Self-ballasted Compact Fluorescent Lamps
	CBA Projection Lamp
	Condenser-Reflector, Four-Pin, Prefocus-Base Projection Lamps—Dimensions
	Dimensions for Projection Lamps—Four-Pin, Prefocus, Base-down Type
	High Pressure Sodium Lamps
	American National Standard for Electric Lamps—High-Intensity Discharge Lamps, Method of Designation
	American National Standard for Electric Rigid Steel Conduit (ERSC)
	American National Standard for Electrical Rigid Aluminum Conduit (ERAC)
	American National Standard for Intermediate Metal Conduit (EIMC)
	For Lamp Ballast—Line Frequency Fluorescent Lamp Ballast
	American National Standard for Lamp Ballasts—Fluorescent Adapters
	For Portable Lithium Primary Cells and Batteries—General and Specifications
	For Portable Primary Cells and Batteries with Aqueous Electrolyte—General and Specifications
	American National Standard for Portable Rechargeable Cells and Batteries—General and Specifications
	American National Standard For Roadway and Area Lighting Equipment—Elliptically Shaped, Enclosed Side-mounted Luminaires for Horizontal-burning ...
	American National Standard for Roadway and Area Lighting Equipment—Enclosed, Post Top-Mounted Luminaires
	American National Standard for Roadway and Area Lighting Equipment—Filament Lamps—A Guide for Selection
	American National Standard for Roadway and Area Lighting Equipment—Film Cutouts
	American National Standard for Roadway and Area Lighting Equipment—Glass Lenses Used in Luminaires
	American National Standard for Roadway and Area Lighting Equipment—High-pressure Sodium and Retrofit High-pressure Sodium Lamps for Mercury Ball...
	American National Standard for Roadway and Area Lighting Equipment—Internal Labeling of Luminaires
	American National Standard for Roadway and Area Lighting Equipment—Locking-type Photocontrol Devices and Mating Receptacles—Physical and E...
	American National Standard for Roadway and Area Lighting Equipment—Luminaire Attachments
	American National Standard for Roadway and Area Lighting Equipment—Luminaire Voltage Classification
	American National Standard for Roadway and Area Lighting Equipment—Mercury Lamps—Guide for Selection
	American National Standard for Roadway and Area Lighting Equipment—Metal Brackets for Wood Poles
	American National Standard for Roadway and Area Lighting Equipment—Metal Heads and Reflector Assemblies—Mechanical and Optical Interchange...
	American National Standard for Roadway and Area Lighting Equipment—Multiple Sockets
	American National Standard for Roadway and Area Lighting Equipment—Nonlocking (Button) Type Photocontrols
	American National Standard for Roadway and Area Lighting Equipment—Socket Support Assemblies for Metal Heads—Mechanical Interchangeability
	American National Standard for Roadway and Area Lighting Equipment—Trouble-shooting Guide for High-pressure Sodium Luminaires
	American National Standard for Roadway and Area Lighting Equipment—Vandal Shields for Roadway and Area Lighting Luminaires
	American National Standard for Roadway and Area Lighting Equipment--Enclosed Side-mounted Luminaires for Horizontal-burning High-intensity Discharge L...
	American National Standard For Roadway and Area Lighting Equipment--High-intensity Discharge and Low-pressure Sodium Lamps in Luminaires--Field Identi...
	American National Standard for Roadway and Area Lighting Equipment--Tunnel and Underpass Lighting Luminaires
	American National Standard for Roadway and Area Lighting—Plug-in Type Receptacle and Plug for High-intensity Discharge Ignitors
	American National Standard for Roadway Lighting and Area Lighting Equipment--Vertical Tenons Used with Post Top-mounted Luminaires
	American National Standard for Steel Electrical Metallic Tubing (EMT)
	American National Standard for Switchgear—Indoor AC Medium-Voltage Switches for Use in Metal-Enclosed Switchgear—Conformance Test Procedur...
	American National Standard for Switchgear—Medium Voltage Metal-Clad Assemblies—Conformance Test Procedures
	American National Standard for Switchgear—Metal-Enclosed Interrupter Switchgear Assemblies—Conformance Testing
	American National Standard for Switchgear—Metal-Enclosed Low-Voltage AC Power Circuit Breaker Switchgear Assemblies—Conformance Test Proce...
	American National Standard—Gauges for Electric Lamp Bases and Lampholders
	American National Standard--Guidelines and General Information for Electrical Lamp Bases, Lampholders, and Gauges
	Requirements for Watthour Meter Sockets
	Ampacities of Cables in Open Top Cable Trays (ICEA P 54 440 Third Edition)
	Annular Space Protection of Openings Created by Penetrations of Tubular Steel Conduit, A Review of UL Special Service Investigation, File NC 546, Proj...
	ANSI Code Update to Include Letter “C” for Ceramic Metal Halide Lamps
	Application and Installation Guidelines for Armored Cable and Metal-Clad Cable
	Application and Installation Guidelines for Flexible and Liquidtight Flexible Metal Conduits
	Application and Installation Guidelines for Nonmetallic-Sheathed Cables
	Application Guide for AC Adjustable Speed Drive Systems
	Application Guide for Ceramic Suspension Insulators
	Application Information for Busway Rated 600 Volts or Less
	Application Information for Limit Switches
	Application Note: Wiring Requirements for T-8 Fluorescent Lamps with Instant-start Ballasts
	Application Profile for DATEX-ASN (AP-DATEX)
	Audio Standard for Nurse Call Systems
	Ballasts for High-Intensity Discharge and Low-Pressure Sodium Lamps (Multiple-Supply Type)
	Best Practices for Metal Halide Lighting Systems, Plus Questions and Answers about Lamp Ruptures in Metal Halide Lighting Systems
	Best Practices for Operating Fluorescent Lighting Systems
	Binational Wire and Cable Packaging Standard
	Brushes for Electrical Machines
	Busways
	Cable Tray Installation Guidelines
	Calendered Aramid Papers Used for Electrical Insulation
	Characteristics of and Test Procedures for a Phantom to Benchmark Cardiac Fluoroscopic and Photographic Performance
	Characterization of Phased Array Coils for Diagnostic Magnetic Resonance Images
	Characterization of Special Purpose Coils for Diagnostic Magnetic Resonance Images
	Characterization of the Specific Absorption Rate for Magnetic Resonance Imaging Systems
	Coated Electrical Sleeving
	Communication Type Battery Chargers
	Compact Fluorescent Lamps In Residences – Power Quality Implications
	Compatibility of Add-on Tube Guards with T-8 Fluorescent Lamps Operating on High Frequency Electronic Ballasts
	Compatibility of Fluorescent Lamps and Electronic Ballasts in Frequently Switched Applications
	Condensing Dichroic Coated Integral Reflector Side Pin Tungsten Halogen Projection Lamps with GX7.9 Bases
	Conduit-In-Casing Construction
	Consolidation/Rev. of C78.1405-1991, C78.1422-1991, and C78.1423-1991—Slide Projector Lamps-Condensing, Dichroic, Two-inch (51 mm), Integral Ref...
	Consumer Guide for Four-Foot Fluorescent Bulbs
	Continuity of Coating Testing for Electrical Conductors
	Data Element Definitions for Transportation Sensor Systems
	DDM Projection Lamp
	Deadfront Distribution Switchboards
	DED Projection Lamp
	Degrees of Protection Provided by Enclosures (IP Code)(identical national adoption)
	Demand Reduction and Energy Savings Using Occupancy Sensors
	Determination of Gradient-Induced Electric Fields in Diagnostic Magnetic Resonance Imaging
	Determination of Image Uniformity in Diagnostic Magnetic Resonance Images
	Determination of Local Specific Absorption Rate (SAR) in Diagnostic Magnetic Resonance Imaging
	Determination of Signal-to-Noise Ratio (SNR) in Diagnostic Magnetic Resonance Imaging
	Determination of Slice Thickness in Diagnostic Magnetic Resonance Imaging
	Determination of Two-Dimensional Geometric Distortion in Diagnostic Magnetic Resonance Images
	Digital Imaging and Communications in Medicine (DICOM) Part 1: Introduction and Overview
	Digital Imaging and Communications in Medicine (DICOM) Part 10: Media Storage and File Format for Media Interchange
	Digital Imaging and Communications in Medicine (DICOM) Part 11: Media Storage Application Profiles
	Digital Imaging and Communications in Medicine (DICOM) Part 12: Media Formats and Physical Media for Media Interchange
	Digital Imaging and Communications in Medicine (DICOM) Part 13: Print Management Point-to-Point Communication Support
	Digital Imaging and Communications in Medicine (DICOM) Part 14: Grayscale Standard Display Function
	Digital Imaging and Communications in Medicine (DICOM) Part 15: Security and System Management Profiles
	Digital Imaging and Communications in Medicine (DICOM) Part 16: Content Mapping Resource
	Digital Imaging and Communications in Medicine (DICOM) Part 17: Explanatory Information
	Digital Imaging and Communications in Medicine (DICOM) Part 18: Web Access to DICOM Persistent Objects (WADO)
	Digital Imaging and Communications in Medicine (DICOM) Part 2: Conformance
	Digital Imaging and Communications in Medicine (DICOM) Part 3: Information Object Definitions
	Digital Imaging and Communications in Medicine (DICOM) Part 4: Service Class Specifications
	Digital Imaging and Communications in Medicine (DICOM) Part 5: Data Structures and Encoding
	Digital Imaging and Communications in Medicine (DICOM) Part 6: Data Dictionary
	Digital Imaging and Communications in Medicine (DICOM) Part 7: Message Exchange
	Digital Imaging and Communications in Medicine (DICOM) Part 8: Network Communication Support for Message Exchange
	Digital Imaging and Communications in Medicine (DICOM) Part 9: Point to Point Communication Support for Message Exchange
	DICOM Set
	Dimensions and Centering Systems for Projection Lamps—51mm (Two-inch) Integral Reflector Rim Reference Lamps with GX5.3, GY5.3, and GU5.3 Bases
	Distribution Equipment Switch Application and Maintenance Guide, A User's Reference
	DNF Projection Lamps
	Double-Capped Fluorescent Lamps—Safety Specifications
	Dry Type Transformers for General Applications
	Dynamic Coefficient of Friction of Film Insulated Magnet Wire
	EJL Projection Lamp
	ELB Projection Lamp
	ELC Projection Lamp
	Electric Arc Welding Power Sources
	Electric Lamps—250 Watt, 120 Volt, Self-Ballasted Mercury Lamps Specifications
	Electric Lamps—70 Watt, M85 Double-Ended Metal-Halide Lamps
	Electric Power Connection for Substations
	Electrical and Electronic Silicone and Silicone-Braided Insulated Hook-Up Wire Types S (600 V), ZHS (600 V), SS (1000 V), ZHSS (1000 V), and SSB Braid...
	Electrical Insulating Varnish
	Electrical Nonmetallic Tubing (ENT)
	Electrical Polyvinyl Chloride (PVC) Tubing and Conduit
	Electrical, Thermal, and Loading Characteristics of X-Ray Tubes Used for Medical Diagnosis
	EML Projection Lamp
	EMM Projection Lamp
	Enclosed and Miscellaneous Distribution Equipment Switches (600 Volts Maximum)
	Enclosures for Electrical Equipment (1000 Volts Maximum)
	End-of-life Operation of Small Diameter (5/8 Inch Diameter or Less) Pin-based Fluorescent Lamps
	Energy Efficiency for Electronic Ballasts for T8 Fluorescent Lamps
	Energy Management Guide for Selection and Use of Fixed Frequency Medium AC Squirrel-Cage Polyphase Induction Motors
	Energy Management Guide for Selection and Use of Single Phase Motors
	Engineering Series Ratings: Is It Practical?
	Ethernet Subnetwork Profile
	Exit Sign Brightness for Visibility & Safety
	Exit Sign Visibility Testing Requirements for Safety and Energy Efficiency
	Expansion Joints for PVC Rigid Nonmetallic Conduit
	EYB Projection Lamp
	Fiberglass Cable Tray Systems
	File Transfer Protocol Application Profile
	Fire Service Annunciator and Interface
	Fittings for Polyvinyl Chloride (PVC) Plastic Utilities Duct for Underground Installation
	Fittings, Cast Metal Boxes, and Conduit Bodies for Conduit, Electrical Metallic Tubing, and Cable
	Fluorescent Ballast Connector
	Fluorescent Lamps and the Environment
	Fluorescent Lamps—Guide for Electrical Measurements
	American National Standard for Electric Lamps--Double-Capped Fluorescent Lamps--Dimensional and Electrical Characteristics
	For Electric Lamps—Use of Protective Shields with Tungsten-Halogen Lamps—Cautionary Notice
	For Electric Lamps: 100-Watt, M91 Double-Ended Metal-Halide Lamps
	For Electric Lamps: 150-Watt, M81 Double-Ended Metal-Halide Lamps
	ANSI_ANSLGC78-45 For Electric Lamps: Self-ballasted Mercury Lamps
	For Electricity Meter—0.2 and 0.5 Accuracy Classes
	For Indoor Alternating Current High-Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear—Conformance Test Procedu...
	For Lamp Ballasts—Definitions—for Fluorescent Lamps and Ballasts
	For Portable Lithium Primary Cells and Batteries—Safety Standard
	For Portable Primary Cells and Batteries with Aqueous Electrolyte—Safety Standard
	For Portable Rechargeable Cells and Batteries—Safety Standard
	For Roadway and Area-Lighting Equipment—Series Sockets and Series-Socket Receptacles
	Gas Tube Surge Arresters on Wire Line Telephone Circuits
	General Color Requirements for Wiring Devices
	General Instructions for Proper Handling, Installation, Operation, and Maintenance of Busway Rated 600 Volts or Less
	General Instructions for Proper Handling, Installation, Operation, and Maintenance of Deadfront Distribution Switchboards Rated 600 Volts or Less
	General Instructions for Proper Installation, Operation, and Maintenance of Panelboards Rated 600 Volts or Less
	General Specification for Consultants, Industrial and Municipal: NEMA Premium Efficiency Electric Motors (600 Volts or Less)
	Generic Designation System for Pin-Based Compact Fluorescent and T5 Twin Fluorescent Lamps
	Getting the Most from Your Lighting Dollar (Third Edition)
	Global Object (GO) Definitions
	Glossary of Terms Pertaining To Remote Illumination Systems
	Graphic Symbols for Arc Welding and Cutting Apparatus
	Grounding Rod Electrodes and Grounding Rod Electrode Couplings
	Guide for Determining Energy Efficiency for Distribution Transformers
	Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable...
	Guide for Proper Use of Smoke Detectors in Duct Applications
	Guide for Proper Use of System Smoke Detectors
	Guide to Industrial Lighting
	Guide to Retail Lighting Management (3rd Edition)
	Guidelines for Inspection and Preventive Maintenance of Molded Case Circuit Breakers Used in Commercial and Industrial Applications
	Guidelines for Precautionary Labeling for Arc-Welding and Cutting Products
	Guidelines on the Application of Dimming to High Intensity Discharge Lamps
	Hardware Standards for Dynamic Message Signs (DMS) with NTCIP Requirements
	Harmonic Emission Limits—Related Power Quality Requirements for Lighting Equipment
	High Frequency Fluorescent Lamp Ballast—Supplements
	High Intensity Discharge and Low Pressure Sodium Lamps, Ballasts and Transformers—Definitions
	High Temperature Instrumentation and Control Cables
	High Voltage X-Ray Cable Assemblies and Receptacles
	High-Pressure Decorative Laminates
	High-Temperature and Electronic Insulated Wire, Impulse Dielectric Testing
	Impact of Electrostatic Discharges in the Hospital Environment
	Impact of Mercury Legislation on the Lighting Industry
	Incandescent Lamps—A, G, PS, and Similar Shapes with E39 Mogul Screw Bases
	Incandescent Lamps—Miscellaneous Types
	Incompatibility of T8 Ballasts (RS, PS, Dimming) and “Shunted” Bi-pin Lampholders
	Industrial Control and Systems Part 1: Electromechanical AC Transfer Switch Equipment
	Industrial Control and Systems: AC Transfer Equipment — Part 2: Static AC Transfer Equipment
	Industrial Control and Systems: Additional Requirements for Proximity Switches Suitable for Use in Strong Magnetic Fields
	Industrial Control and Systems: Adjustable-Speed Drives
	Industrial Control and Systems: Application Guide for Electric Fire Pump Controllers
	Industrial Control and Systems: Control Circuit and Pilot Devices
	Industrial Control and Systems: Controllers, Contactors, and Overload Relays Rated 600 Volts
	Industrial Control and Systems: Controllers, Contactors, and Overload Relays, Rated Not More Than 2000 Volts AC or 750 Volts DC: Part 8 - Disconnect D...
	Industrial Control and Systems: Crane and Hoist Controllers
	Industrial Control and Systems: Diagrams, Device Designations, and Symbols
	Industrial Control and Systems: Enclosures
	Industrial Control and Systems: General Requirements
	Industrial Control and Systems: Handling, Storage, and Installation Guide for AC General-Purpose Medium Voltage Contactors and Class E Controllers, 50...
	Industrial Control and Systems: High Pressure Power Wash Test Procedure for Self-Contained Control-Circuit Devices
	Industrial Control and Systems: Instructions for the Handling, Installation, Operation, and Maintenance of Electric Fire Pump Controllers Rated Not Mo...
	Industrial Control and Systems: Instructions for the Handling, Installation, Operation, and Maintenance of Motor Control Centers Rated Not More than 6...
	Industrial Control and Systems: Medium Voltage Controllers Rated 2001 to 7200 Volts AC
	Industrial Control and Systems: Motion/Position Control Motors, Controls, and Feedback Devices
	Industrial Control and Systems: Motor Control Centers
	Industrial Control and Systems: Preventive Maintenance of Industrial Control and Systems Equipment
	Industrial Control and Systems: Profiles of Networked Industrial Devices—Part 1: General Rules
	Industrial Control and Systems: Safety Guidelines for the Application, Installation, and Maintenance of Solid State Controls
	Industrial Control and Systems: Terminal Blocks
	Industrial Control and Systems: Typical Proximity Switch Specifications
	Industrial Laminated Thermosetting Products
	Information Guide for General Purpose Industrial AC Small and Medium Squirrel-Cage Induction Motor Standards
	Instrucciones Generales para el Manejo, Instalacion, Operacion y Mantenimiento Correcto de Tableros de Distribucion de Frente Muerto hasta 600 Volts N...
	Instrucciones Generales Para el Manejo, Instalacion, Operacion y Mantenimiento de Electroductos Hasta 600 Volts Nominales o Menos
	Instrucciones Generales Para la Instalacion, Operacion y El Mantenimiento Correcto de Tableros de Alumbrado y Control Hasta 600 Volts Nominales o Meno...
	Instrument Transformers for Revenue Metering (110 kV BIL and less)
	Instrument Transformers for Revenue Metering (125 kV BIL through 350 kV BIL)
	Interaction of Infrared Controls and Electronic Compact Fluorescent Lamps
	Interaction of Infrared Controls and Fluorescent Lamp/Ballast Systems in Education Facilities
	Interconnection Circuitry of Noncoded Remote Station Protective Signaling Systems
	Internet (TCP/IP and UDP/IP) Transport Profile
	Land-Based Steam Turbine Generator Sets 0 to 33,000 kW
	Low Voltage Cartridge Fuses
	Low Voltage Surge Protection Devices
	Magnet Wire
	Manufactured Electrical Mica
	Manufactured Graphite/Carbon Electrodes
	Manufacturer Take Back of Lamps
	Marking of Luminaire Codes on Metal Halide Lamps
	Measurement of Dimensions and Properties of Focal Spots of Diagnostic X-Ray Tubes
	Measurement of the Maximum Symmetrical Radiation Field from a Rotating Anode X-Ray Tube Used for Medical Diagnosis
	Measurement Procedure for Time Varying Gradient Fields (dB/dt) for Magnetic Resonance Imaging Systems
	Mechanical Safety Standard for Power Driven Motions of Electromedical Equipment
	Mercury Lamps—Method of Measuring Characteristics
	Metal Cable Tray Systems
	Method of Designation for Electric Lamps—Photographic, Stage, and Studio
	Method of Designation for Electric Lamps--Miniature and Sealed-Beam Incandescent Lamps
	Method of Measurement of Fluorescent Lamp Ballasts
	MG1-2006-Errata
	Microfilm Projection Lamps—Two-Inch (51 mm) Dichroic Coated Integral Reflector, Rim Reference, Tungsten Halogen Lamps with GX5.3 Bases
	Molded Case Circuit Breakers and Their Application
	Motors and Generators
	Motors and Generators, Revision 1
	MG 1-2006 Rev 1 2007 (revised pages only)
	National Transportation Communications for ITS Protocol (NTCIP) Object Definitions for Actuated Traffic Signal Controller Units
	National Transportation Communications For ITS Protocol—Class B Profile
	NEMA and IEC Devices for Motor Service—A Guide for Understanding the Differences
	NEMA Guide to Lighting Controls
	NEMA Installation Guide for Nurse Call Systems (R2007)
	Nomenclature for Glass Bulbs Intended for Use with Electric Lamps
	Nonmetallic Outlet Boxes, Device Boxes, Covers, and Box Supports
	Nonmetallic Riser U-Type Guards
	NTCIP Object Definitions for Dynamic Message Signs (DMS)
	Object Definitions for Closed Circuit Television (CCTV) Camera Control
	Object Definitions for Closed Circuit Television (CCTV) Switching
	Object Definitions for Data Collection and Monitoring (DCM) Devices
	Object Definitions for Environmental Sensor Stations (ESS)
	Object Definitions for Ramp Meter Control (RMC) Units
	Occupancy Motion Sensors
	Octet Encoding Rules (OER) Base Protocol
	Packaging of Master Bundles for EPC-40 Polyvinyl Chloride (PVC) Conduit
	Packaging of Master Bundles for Steel Rigid Conduit, Intermediate Metal Conduit (IMC), and Electrical Metallic Tubing
	Panelboards
	Performance Measurements and Quality Control Guidelines for Non-Imaging Intraoperative Gamma Probes
	Performance Measurements of Positron Emission Tomographs
	Performance Measurements of Scintillation Cameras
	Performance Standard for Category 6 and Category 7 100 Ohm Shielded and Unshielded Twisted Pair...
	Performance Standard for Coaxial Premise Data Communications Cables
	Performance Standard for Twisted Pair Premise Voice and Data Communications Cables
	Performance Testing for Lighting Controls and Switching Devices with Electronic Fluorescent Ballasts
	Performing a Lighting System Audit (Revised Edition)
	Pin Based Compact Fluorescent Lamps
	Plugs, Receptacles, and Connectors of the Pin and Sleeve Type for Hazardous Locations
	Point to Multi-Point Protocol Using FSK Modem Subnetwork Profile
	Point to Multi-Point Protocol Using RS-232 Subnetwork Profile
	Point-to-Point Protocol over RS-232 Subnetwork Profile
	Polyvinyl Chloride (PVC) Externally Coated Galvanized Rigid Steel Conduit and Intermediate Metal Conduit
	Polyvinyl Chloride (PVC) Fittings for Use with Rigid PVC Conduit and Tubing
	Polyvinyl Chloride (PVC) Plastic Utilities for Underground Installations
	Powdered Graphite
	Power Supply Guidelines for X-Ray Machines
	Power Switchgear Assemblies
	Power Switching Equipment
	Procedure for Determining Luminaire Efficacy Ratings for Commercial, Non-Residential Downlight Luminaires
	Procedure for Determining Luminaire Efficacy Ratings for Fluorescent Luminaires
	Procedure for Determining Luminaire Efficacy Ratings for High-Intensity Discharge Industrial Luminaires
	Procedure for U-shaped Fluorescent Lamp Sample Preparation and the TCLP
	Procedure for Use in Preparation of Lamp Space Drawings
	Procedures for Fluorescent Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure
	Procedures for High Intensity Discharge Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure
	Procedures for High-intensity Discharge Lamp Sample Preparation and the TCLP
	Procedures for Incandescent Lamp Sample Preparation and the TCLP
	Procedures for Incandescent Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure
	Procedures for Integral Electronic Compact Fluorescent Lamp Sample Preparation and the TCLP
	Procedures for Linear Fluorescent Lamp Sample Preparation and the TCLP
	Procedures for Pin-Based Compact Fluorescent Lamp Sample Preparation and the TCLP
	Product Identification and Bar Coding Requirements for Building Wire Products
	Product Identification Numbers for Metallic Tubular Conduit Products for Use With Bar Coding and Electric Data Interchange Applications
	Product Safety Guide for Developing Documentation for Fire Alarm Systems and Equipment
	Profile Framework
	Profiting from Lighting Modernization
	Programmable Controllers—Part 1: General Information
	Programmable Controllers—Part 2: Equipment Requirements and Test
	Programmable Controllers—Part 3: Programming Languages
	Programmable Controllers—Part 4: User Guidelines
	Programmable Controllers--Part 5: Communications
	Programmable Controllers--Part 7: Fuzzy Control Programming
	Programmable Controllers--Part 8: Guidelines for the Application and Implementation of Programming Languages
	Projection Lamps—Tungsten-Halogen Lamps with G5.3 Bases
	Projection Lamps, Incandescent, Method for Life Testing
	Protocol Specification for ANSI Type 2 Optical Port
	Protocol Specification for Telephone Modem Communication
	Quantification and Mapping of Geometric Distortion for Special Applications
	Quick-Connect Terminals
	Radioactive Substances In Compact Fluorescent Lamps
	Recessed Luminaires; Ceiling Compatibility
	Reclaiming of Magnet Wire Packaging
	Recommendations for the Care and Maintenance of High Intensity Metal Halide and Mercury Lighting in Schools
	Recommended Practice — Lamp Seasoning for Fluorescent Dimming Systems
	Recommended Practices for Load Bearing Mechanical Assemblies Used in Diagnostic Imaging
	Recommended Practices for T8 Rapid Start Fluorescent Lamp Dimming (17W, 25W, 32W, and 40W Lamps)
	Reference Ballasts for Fluorescent Lamps
	Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
	Relative Temperature Indices of Industrial Thermosetting Laminates
	Repeated Spark/Impulse Dielectric Testing
	Requirements for Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVT)
	Residential Controls—Class 2 Transformers
	Residential Controls—Electrical Wall-Mounted Room Thermostats
	Residential Controls—Surface-Type Controls for Electric Storage Water Heaters
	Residential Controls—Temperature Limit Controls for Electric Baseboard Heaters
	Residential Controls: Hot Water Immersion Controls
	Residential Controls: Line Voltage Integrally Mounted Thermostats for Electric Heaters
	Returnable Packaging for 24 X 6 Magnet Wire Reels
	Safety Labels for Padmounted Switchgear and Transformers Sited in Public Areas
	Safety Standard for Construction and Guide for Selection, Installation, and Use of Electric Motors and Generators
	Safety Standards for Construction and Guide for Selection, Installation, and Operation of Adjustable-Speed Drive Systems
	Selection and Installation Guidelines for Electrical Outlet Boxes
	Selection and Installation Guidelines For Fittings for Use With Flexible Electrical Conduit and Cable
	Selection and Installation Guidelines for Fittings for Use with Non-flexible Electrical Metal Conduit or Tubing (Rigid Metal Conduit, Intermediate Met...
	Semiautomatic Wire Feed Systems for Arc Welding
	Sheet-Steel Outlet Boxes, Device Boxes, Covers, and Box Supports
	Shunt Capacitors
	Simple Transportation Management Framework
	Simple Transportation Management Framework Application Profile
	Simulated Insertion Force Test for Film Insulated Round Magnet Wire
	Single-Capped Fluorescent Lamps—Safety Specifications
	Slide Projector Lamps, Condensing, Dichroic, 1.65in. (42mm), Int-Refl., Rim Ref. TH Lamps w/GX5.3 Bases
	Smooth Wall Coilable Electrical Polyethylene Conduit
	Solvent-Cementing Joints for PVC Rigid Nonmetallic Conduit, Duct, and Fittings
	Sound Level Prediction for Installed Rotating Electrical Machines
	Specialty Transformers (Except General Purpose Type)
	Specification for Tubular Incandescent Infrared Lamps
	Specifications for Mercury Lamps
	Specifications for Mercury Lamps--Maximum Outline Drawing of Bulb BT56
	Specifications for the Chromaticity of Fluorescent Lamps
	Standard for Aerospace and Industrial Electrical Cable
	Standard for Control, Thermocouple Extension, and Instrumentation Cables
	Standard for Nonshielded Cables Rated 2001-5000 Volts for use in the Distribution of Electric Energy
	Standard for Real-Time Display of Thermal and Mechanical Acoustic Output Indices on Diagnostic Ultrasound Equipment, Revision 2
	Standard for the Labeling of Distribution Transformer Efficiency
	Standard for Uninsulated Conductors Used in Electrical and Electronic Applications
	Standard Method of Measurement of Lamp Cap Temperature Rise
	Standard Method of Measuring the Pinch Temperature of Quartz Tungsten-Halogen Lamps
	Standard on Common Public Transportation (CPT) Objects
	Standard on Control Center (CC) Objects
	Standard on Fare Collection (FC) Business Area Objects
	Standard on Incident Management (IM) Objects
	Standard on Passenger Information (PI) Objects
	Standard on Scheduling/Runcutting (SCH) Objects
	Standard on Spatial Representation (SP) Objects
	Standard Test Method for Measuring the Energy Consumption of Distribution Transformers
	Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test
	Steam Turbines for Mechanical Drive Service
	Surge Arresters
	Switchgear Low Voltage AC Power Circuit Breakers Used in Enclosures—Test Procedures
	TCIP Framework Standard
	Test Procedures for Low Voltage AC Power Circuit Protectors Used in Enclosures
	Test Standard for Determination of the Limiting Spatial Resolution of X-Ray Image Intensifier Systems
	Test Standard for the Determination of the Radial Image Distortion of an X-Ray Image Intensifier System
	Test Standard for the Determination of the System Contrast Ratio and the System Veiling Glare Index of an X-Ray Image Intensifier System
	Test Standard for the Determination of the Visible Entrance Field Size of an X-Ray Image Intensifier System
	Test Standard for the Measurement for the Image Signal Uniformity of an X-Ray Image Intensifier System
	The Grounding System that Works—Steel Conduit (EMT, IMC, and Galvanized Rigid)
	The Labeling of Mercury Containing Lamps
	Traffic Control Systems (Not Recommended for New Designs)
	Traffic Controller Assemblies with NTCIP Requirements, Version 02.06
	Training Manual on Fire Alarm Systems
	Transfer Impedance Testing
	Transformers, Regulators, and Reactors
	Transportation Transport Profile
	Trivial File Transfer Protocol Application Profile
	Tubular Tungsten-Halogen Lamps—Physical Characteristics
	Tungsten-Halogen Lamps (Bulbs): Ultraviolet, Rupture, and High Temperature Risks
	Tungsten-Halogen Lamps with a Light Center Length of 63.5 mm (2 1/2 in.)
	Tungsten-Halogen Lamps with a Light Center Length of 89 mm (2 1/2 in.)
	Tungsten-Halogen Lamps with G38 Bases and 127 mm LCL
	Tungsten-Halogen Lamps with G6.35, GX6.35, and GY6.3 Bases
	Tungsten-Halogen Lamps with G9.5 Bases and 60.5 mm LCL
	Tungsten-Halogen Lamps with GZ9.5 Two-Pin, Prefocus Bases and 36.5mm Nominal Light Center Length
	Tungsten-Halogen Lamps with P28 Bases and 55.5 mm LCL
	Two Inch (51-mm) Integral-Reflector Lamps with Front Covers and GU5.3 or GX5.3 Bases
	Two-inch (51 mm) Dichroic Coated Integral Reflector, Rim Reference, Tungsten Halogen Large Screen Projection Lamps with GX5.3 Bases
	Ultraviolet Radiation From Fluorescent Lamps
	Uncoated Treated Fiberglass Sleeving
	Uninterruptible Power Systems (UPS)—Specification and Performance Verification
	Untreated Mica Paper Used for Electrical Insulation
	User Guide to Product Specifications for Electrical Building Wire and Cable
	User Guide to Product Specifications for Metal Electrical Conduit and Tubing
	User's Manual for the Installation of Underground Corrugated Coilable Plastic Utility Duct (CCD)
	Utility Type Battery Chargers
	White Paper on Outdoor Lighting Issues
	Wire Selection Guidelines for Wires Rated at 200-450 deg./C
	Wiring Devices—Dimensional Requirements
	Wiring Requirements for 2G11 Based T-5 Fluorescent Twin Lamps With Instant-Start Ballasts
	Wiring Requirements for T-8 Lamps with Instant-Start Ballasts