NEMA - Standards by Document Number

Standards by Document Number

NEMA > Standards > Standards by Document Number

1 - A

Standards: 1 to 100 out of 521
(Standards with no document number are not listed)

1 2 3 4 5 6 | next >

Document Number:	Title:
107-1987 (R1993)	Methods of Measurement of Radio Influence Voltage (RIV) of High Voltage Apparatus
260-1996 (2004)	Safety Labels for Padmounted Switchgear and Transformers Sited in Public Areas
5RN 2189	User Guide to Product Specifications for Metal Electrical Conduit and Tubing
AB 3-2006	Molded Case Circuit Breakers and Their Application
AB 4-2003	Guidelines for Inspection and Preventive Maintenance of Molded Case Circuit Breakers Used in Commercial and Industrial Applications
ANSI _ANSLG C78.380-2007	American National Standard for Electric Lamps—High-Intensity Discharge Lamps, Method of Designation
ANSI C119.1-2006	American National Standard for Electric Connectors—Sealed Insulated Underground Connector Systems Rated 600 Volts
ANSI C119.4-2004	American National Standard for Electric Connectors—Connectors for Use Between Aluminum-to-Aluminum or Aluminum-to-Copper Conductors
ANSI C119.6-2006	American National Standard for Electric Connectors—Non-Sealed, Multiport Connector Systems Rated 600 Volts or Less for Aluminum and Copper Conductors
ANSI C12.1-2001	Code for Electricity Metering
ANSI C12.10-2004	American National Standard for Physical Aspects of Watthour Meters—Safety Standard
ANSI C12.11-1987 (R2002)	Instrument Transformers for Revenue Metering, 10 kV BIL Through 350 kV BIL (0.6 kV NSV Through 69 kV NSV)
ANSI C12.18-2006	Protocol Specification for ANSI Type 2 Optical Port
ANSI C12.19-1997	Utility Industry End Device Data Tables
ANSI C12.20-2002	For Electricity Meter—0.2 and 0.5 Accuracy Classes
ANSI C12.21-2006	Protocol Specification for Telephone Modem Communication
ANSI C12.4-1984 (R2002)	Registers, Mechanical Demand
ANSI C12.5-1978 (R2002)	Meters, Thermal Demand
ANSI C12.6-1987 (R2002)	Phase-Shifting Devices Used in Metering, Marking and Arrangement of, Terminals for
ANSI C12.7-2005	Requirements for Watthour Meter Sockets
ANSI C12.8-1981 (R2002)	Test Blocks and Cabinets for Installation of Self-Contained A-Base Watthour Meters
ANSI C12.9-2005	For Test Switches for Transformer-Rated Meters
ANSI C136.1-2004	American National Standard for Roadway and Area Lighting Equipment—Filament Lamps—A Guide for Selection
ANSI C136.10-2006	American National Standard for Roadway and Area Lighting Equipment—Locking-type Photocontrol Devices and Mating Receptacles—Physical and Electrical Interchangeability and Testing
ANSI C136.11-2006	American National Standard for Roadway and Area Lighting Equipment—Multiple Sockets
ANSI C136.12-2004	American National Standard for Roadway and Area Lighting Equipment—Mercury Lamps—Guide for Selection
ANSI C136.13-2004	American National Standard for Roadway and Area Lighting Equipment—Metal Brackets for Wood Poles
ANSI C136.14-2004	American National Standard For Roadway and Area Lighting Equipment—Elliptically Shaped, Enclosed Side-mounted Luminaires for Horizontal-burning High-intensity Discharge Lamps
ANSI C136.15-2004	American National Standard For Roadway and Area Lighting Equipment--High-intensity Discharge and Low-pressure Sodium Lamps in Luminaires--Field Identification
ANSI C136.16-2004	American National Standard for Roadway and Area Lighting Equipment—Enclosed, Post Top-Mounted Luminaires
ANSI C136.17-2005	American National Standard for Roadway and Area Lighting Equipment--Enclosed Side-mounted Luminaires for Horizontal-burning High-intensity Discharge Lamps--Mechanical Interchangeability of Refractors
ANSI C136.18-2006	American National Standard for Roadway and Area Lighting Equipment—High-mast Side-mounted Luminaires for Horizontal- or Vertical-burning High-intensity Discharge Lamps
ANSI C136.19-2004	American National Standard for Roadway and Area Lighting Equipment—High-pressure Sodium and Retrofit High-pressure Sodium Lamps for Mercury Ballasts—Guide for Selection
ANSI C136.2-2004	American National Standard for Roadway and Area Lighting Equipment—Luminaire Voltage Classification
ANSI C136.21-2004	American National Standard for Roadway Lighting and Area Lighting Equipment--Vertical Tenons Used with Post Top-mounted Luminaires
ANSI C136.22-2004	American National Standard for Roadway and Area Lighting Equipment—Internal Labeling of Luminaires
ANSI C136.23-2006	American National Standard for Roadway and Area Lighting Equipment--Enclosed Architectural Luminaires
ANSI C136.24-2004	American National Standard for Roadway and Area Lighting Equipment—Nonlocking (Button) Type Photocontrols
ANSI C136.26-2003	American National Standard for Roadway and Area Lighting Equipment—Trouble-shooting Guide for High-pressure Sodium Luminaires
ANSI C136.27-2005	American National Standard for Roadway and Area Lighting Equipment--Tunnel and Underpass Lighting Luminaires
ANSI C136.28-2006	American National Standard for Roadway and Area Lighting Equipment—Glass Lenses Used in Luminaires
ANSI C136.3-2005	American National Standard for Roadway and Area Lighting Equipment—Luminaire Attachments
ANSI C136.32-2006	American National Standard for Roadway and Area Lighting Equipment—Enclosed Setback Luminaires and Directional Floodlights for High-intensity Discharge Lamps
ANSI C136.33-2005	American National Standard for Roadway and Area Lighting—Plug-in Type Receptacle and Plug for High-intensity Discharge Ignitors
ANSI C136.34-2004	American National Standard for Roadway and Area Lighting Equipment—Vandal Shields for Roadway and Area Lighting Luminaires
ANSI C136.4-2003	For Roadway and Area-Lighting Equipment—Series Sockets and Series-Socket Receptacles
ANSI C136.5-2003	American National Standard for Roadway and Area Lighting Equipment—Film Cutouts
ANSI C136.6-2004	American National Standard for Roadway and Area Lighting Equipment—Metal Heads and Reflector Assemblies—Mechanical and Optical Interchangeability
ANSI C136.9-2003	American National Standard for Roadway and Area Lighting Equipment—Socket Support Assemblies for Metal Heads—Mechanical Interchangeability
ANSI C18.1M, Part 1-2005	For Portable Primary Cells and Batteries with Aqueous Electrolyte—General and Specifications
ANSI C18.1M, Part 2-2003	For Portable Primary Cells and Batteries with Aqueous Electrolyte—Safety Standard
ANSI C18.2M, Part 1-2007	American National Standard for Portable Rechargeable Cells and Batteries—General and Specifications
ANSI C18.2M, Part 2-2007	For Portable Rechargeable Cells and Batteries—Safety Standard
ANSI C18.3M, Part 1-2005	For Portable Lithium Primary Cells and Batteries—General and Specifications
ANSI C18.3M, Part 2-2003	For Portable Lithium Primary Cells and Batteries—Safety Standard
ANSI C29.1-1988 (R2002)	Test Methods for Electrical Power Insulators
ANSI C29.10-1989 (R2002)	American National Standard for Wet-Process Porcelain Insulators—Indoor Apparatus Type
ANSI C29.11-1989 (R1996)	American National Standard for Composite Suspension Insulators for Overhead Transmission Lines—Tests
ANSI C29.12-1997 (R2002)	American National Standard for Insulators—Composite Suspension Type
ANSI C29.13-2000	American National Standard for Insulators—Composite-Distribution Deadend Type
ANSI C29.17-2002	American National Standard for Insulators—Composite-Line Post Type
ANSI C29.18-2003	American National Standard for Insulators—Composite-Distribution Line Post Type
ANSI C29.2-1992 (R1999)	American National Standard for Insulators—Wet-Process Porcelain and Toughened Glass—Suspension Type
ANSI C29.3-1986 (R2002)	American National Standard for Wet Process Porcelain Insulators—Spool Type
ANSI C29.4-1989 (R2002)	American National Standard for Wet-Process Porcelain Insulators—Strain Type
ANSI C29.5-1984 (R2002)	American National Standard for Wet-Process Porcelain Insulators—Low- and Medium-Voltage Types
ANSI C29.6-1994 (R2002)	American National Standard for Wet-Process Porcelain Insulators—High-Voltage Pin Type
ANSI C29.7-1996 (R2002)	American National Standard for Wet-Process Porcelain Insulators—High-Voltage Line-Post Type
ANSI C29.8-1985 (R2002)	American National Standard for Wet Process Porcelain Insulators—Apparatus, Cap, and Pin Type
ANSI C29.9-1983 (R2002)	American National Standard for Wet-Process Porcelain Insulators—Apparatus, Post Type
ANSI C37.50-1989 (R1995, R2000)	Switchgear Low Voltage AC Power Circuit Breakers Used in Enclosures—Test Procedures
ANSI C37.51-2003	American National Standard for Switchgear—Metal-Enclosed Low-Voltage AC Power Circuit Breaker Switchgear Assemblies—Conformance Test Procedures
ANSI C37.52-1974 (R1995, R2000)	Test Procedures for Low Voltage AC Power Circuit Protectors Used in Enclosures
ANSI C37.54-2002	For Indoor Alternating Current High-Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear—Conformance Test Procedures
ANSI C37.55-2002	American National Standard for Switchgear—Medium Voltage Metal-Clad Assemblies—Conformance Test Procedures
ANSI C37.57-2003	American National Standard for Switchgear—Metal-Enclosed Interrupter Switchgear Assemblies—Conformance Testing
ANSI C37.58-2003	American National Standard for Switchgear—Indoor AC Medium-Voltage Switches for Use in Metal-Enclosed Switchgear—Conformance Test Procedures
ANSI C37.85-2002	Alternating-Current High-Voltage Power Vacuum Interrupters—Safety Requirements for X-Radiation Limits
ANSI C50.41-2000	American National Standard for Polyphase Induction Motors for Power Generation Stations
ANSI C62.61-1993	Gas Tube Surge Arresters on Wire Line Telephone Circuits
ANSI C78.1340-1990 (R1995) (ANSI copyright)	450W Self-Ballasted Mercury Lamps
ANSI C78.1341-1990 (R1995) (ANSI copyright)	750-Watt, 120-Volt Self-Ballasted Mercury Lamps
ANSI C78.1342-1990 (R1995) (ANSI copyright)	160-Watt, 120-Volt B87 Self-Ballasted Mercury Halide Lamps
ANSI C78.1372-1997	70-Watt, M98 Single-Ended Metal Halide Lamps
ANSI C78.1374-1996	50-Watt, M110 Single-Ended Metal-Halide Lamps
ANSI C78.1375-1996	400-Watt, M59 Single-Ended Metal Halide Lamps
ANSI C78.1376-1996	1000-Watt, M47 Single-Ended Metal Halide Lamps
ANSI C78.1377-1996	175-Watt, M57 Single-Ended Metal Halide Lamps
ANSI C78.1378-1997	250-Watt, M58 Single-Ended Metal Halide Lamps
ANSI C78.1379-1997	1500-Watt, M48 Single-Ended Metal-Halide Lamps
ANSI C78.1380-1988 (ANSI Copyright)	Electric Lamps—250 Watt, 120 Volt, Self-Ballasted Mercury Lamps Specifications
ANSI C78.1381-1998	Electric Lamps—70 Watt, M85 Double-Ended Metal-Halide Lamps
ANSI C78.1382-1996	100-Watt, M90 Single-Ended Metal Halide Lamps
ANSI C78.1384-1997	150-Watt, M102 Single-Ended Metal-Halide Lamps
ANSI C78.1385-1998	For Electric Lamps: 150-Watt, M81 Double-Ended Metal-Halide Lamps
ANSI C78.1386-1998	For Electric Lamps: 100-Watt, M91 Double-Ended Metal-Halide Lamps
ANSI C78.1387-2001	250-Watt, M80 Double-Ended Metal Halide Lamps
ANSI C78.1401-2004	Dimensions for Projection Lamps—Double-Contact, Medium Ring, Base-up Type
ANSI C78.1402-2004	Dimensions for Projection Lamps—Four-Pin, Prefocus, Base-down Type
ANSI C78.1403-1997	Tungsten-Halogen Lamps with G6.35, GX6.35, and GY6.3 Bases

1 2 3 4 5 6 | next >

	About NEMA	Standards	Products	Media Center	Government	Business & Economy	NEMA Blog