NEMA - Standards by Title

Standards by Title

NEMA > Standards > Standards by Title

& - A

Standards: 1 to 100 out of 574

1 2 3 4 5 6 | next >

Title:	Document Number:
“Quality Control Manual” Template for Manufacturers of Displays and Workstations Labeled for Final Interpretation in Full-Field Digital Mammography	XR 22-2006
“Quality Control Manual” Template for Manufacturers of Hardcopy Output Devices Labeled for Final Interpretation in Full-field Digital Mammography	XR 23-2006
1.65-inch (42-mm) for Integral Reflector Rim Reference Projection Lamps with GX5.3 or GY5.3 Bases—Dimensions and Centering Systems	ANSI C78.1417-1997
100-Watt, M90 Single-Ended Metal Halide Lamps	ANSI C78.1382-1996
1000-Watt, M47 Single-Ended Metal Halide Lamps	ANSI C78.1376-1996
150-Watt, M102 Single-Ended Metal-Halide Lamps	ANSI C78.1384-1997
1500-Watt, M48 Single-Ended Metal-Halide Lamps	ANSI C78.1379-1997
160-Watt, 120-Volt B87 Self-Ballasted Mercury Halide Lamps	ANSI C78.1342-1990 (R1995) (ANSI copyright)
175-Watt, M57 Single-Ended Metal Halide Lamps	ANSI C78.1377-1996
2007-DICOM-FULLSET	[No Document Number]
250-Watt, M58 Single-Ended Metal Halide Lamps	ANSI C78.1378-1997
250-Watt, M80 Double-Ended Metal Halide Lamps	ANSI C78.1387-2001
3.0 kHz Insulation Continuity Proof Testing of Wire and Cable	WC 56-1986 (R2000, R2005)
34 Watt Fluorescent Lamps And High Frequency Electronic Ballasts	LSD 5-1999
400-Watt, M59 Single-Ended Metal Halide Lamps	ANSI C78.1375-1996
450W Self-Ballasted Mercury Lamps	ANSI C78.1340-1990 (R1995) (ANSI copyright)
5-46 KV Shielded Power Cable for Use in the Transmission and Distribution of Electric Energy	ICEA S-93-639/NEMA WC 74-2006
50-Watt, M110 Single-Ended Metal-Halide Lamps	ANSI C78.1374-1996
70-Watt, M98 Single-Ended Metal Halide Lamps	ANSI C78.1372-1997
750-Watt, 120-Volt Self-Ballasted Mercury Lamps	ANSI C78.1341-1990 (R1995) (ANSI copyright)
A Brief Comparison of NEMA 250 and IEC 60529	[No Document Number]
A Guide for the Safe Use of Remote Illumination Systems Equipment, Including a Glossary of Definitions	LSD 10-2000
A Lighting Systems Division Information Bulletin: Changes to the 2005 NEC Will Impact Future Metal Halide Systems Options	LSD 31-2005
A Reasoned Approach to Solving Solderability Problems with Tin-Coated and Nickel-Coated Stranded Conductors in High Performance Wire and Cable Applications	WC 65-1995 (R2003)
AC Overload Test for Film Insulated Magnet Wire	MW 790-2000
AC Vacuum-Break Magnetic Controllers Rated 1500 Volts AC	ICS 2, Part 9-2002 (R 2007)
Acoustic Noise Measurement Procedure for Diagnostic Magnetic Resonance Imaging Devices	MS 4-2006
Acoustic Output Measurement Standard for Diagnostic Ultrasound Equipment, Revision 3	UD 2-2004
Adjustable Speed Electrical Power Drive Systems, Part 1: General Requirements—Rating Specifications for Low Voltage Adjustable Speed D.C. Power Drive Systems	ANSI/NEMA ICS 61800-1-2005
Adjustable Speed Electrical Power Drive Systems, Part 2: General Requirements--Rating Specifications for Low Voltage Adjustable Frequency A.C. Power Drive Systems	ICS 61800-2-2005
Adjustable Speed Electrical Power Drive Systems: Part 4: General Requirements--Rating Specifications for A.C. Power Drive Systems Above 1000 V A.C. and not Exceeding 35 kV	ICS 61800-4-2004
Alternating-Current High-Voltage Circuit Breakers	SG 4-2000 (R2005)
Alternating-Current High-Voltage Power Vacuum Interrupters—Safety Requirements for X-Radiation Limits	ANSI C37.85-2002
Alternatives to Mercury-Containing Light Sources	[No Document Number]
American National Standard for Composite Suspension Insulators for Overhead Transmission Lines—Tests	ANSI C29.11-1989 (R1996)
American National Standard for Electric Connectors—Connectors for Use Between Aluminum-to-Aluminum or Aluminum-to-Copper Conductors	ANSI C119.4-2004
American National Standard for Electric Connectors—Non-Sealed, Multiport Connector Systems Rated 600 Volts or Less for Aluminum and Copper Conductors	ANSI C119.6-2006
American National Standard for Electric Connectors—Sealed Insulated Underground Connector Systems Rated 600 Volts	ANSI C119.1-2006
American National Standard for Electric Lampholders	ANSI_ANSLG C81.62-2007
American National Standard for Electric Lamps—A, G, PS, and Similar Shapes with E26 Medium Screw Bases	ANSI C78.20-2003
American National Standard for Electric Lamps—Amendments to ANSI C78.370-1997 and ANSI C78.390-1998	ANSI C78.370_390lcd-2002
American National Standard for Electric Lamps—Characteristics of Miniature Lamps of T1 and T1 3/4 Shapes	ANSI C78.391-2004
American National Standard for Electric Lamps—Classification of the Beam Patterns of Reflector Lamps	ANSI C78.379-2006
American National Standard for Electric Lamps—Discharge Lamps (Excluding Fluorescent Lamps)—Safety Specifications	ANSI_IEC C78.62035-2004
American National Standard for Electric Lamps—High Intensity Discharge—Methods of Measuring Characteristics	ANSI C78.389-2004
American National Standard for Electric Lamps—High-Intensity Discharge Lamps, Method of Designation	ANSI _ANSLG C78.380-2007
American National Standard for Electric Lamps—High-Intensity Discharge Lamps, Method of Designation (Amendment)	ANSI C78.380a-2004
American National Standard for Electric Lamps—Incandescent Lamps—Safety Specifications—Part 1: Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes	ANSI_ANSLG C78.60432:1-2007
American National Standard for Electric Lamps—Incandescent Lamps—Safety Specifications—Part 2: Tungsten Halogen Lamps for Domestic and Similar General Lighting Purposes	ANSI_ANSLG C78.60432:2-2007
American National Standard for Electric Lamps—Incandescent Lamps—Safety Specifications—Part 3: Tungsten Halogen Lamps (non vehicle)	ANSI_ANSLG C78.60432:3-2007
American National Standard for Electric Lamps—PAR and R Shapes	ANSI C78.21-2003
American National Standard for Electric Lamps—Projection Lamps—Vocabulary	ANSI C78.1452-2004
American National Standard for Electric Lamps—Single-Ended Metal Halide Lamps	ANSI_ANSLG C78.43-2007
American National Standard for Electric Lamps—Specifications for Fluorescent Lamp Starters	ANSI C78.180-2003
American National Standard for Electric Lamps—Specifications for Performance of Self-ballasted Compact Fluorescent Lamps	ANSI C78.5-2003
American National Standard for Electric Lamps--Double-Capped Fluorescent Lamps--Dimensional and Electrical Characteristics	ANSI_IEC C78.81-2005
American National Standard for Electric Rigid Steel Conduit (ERSC)	ANSI C80.1-2005
American National Standard for Electrical Lamp Bases--Specifications for Bases (Caps) for Electric Lamps	ANSI_ANSLG C81.61-2007
American National Standard for Electrical Power Systems and Equipment—Voltage Ratings (60 Hertz)	ANSI C84.1-2006
American National Standard for Electrical Rigid Aluminum Conduit (ERAC)	ANSI C80.5-2005
American National Standard for Insulators—Composite Suspension Type	ANSI C29.12-1997 (R2002)
American National Standard for Insulators—Composite-Distribution Deadend Type	ANSI C29.13-2000
American National Standard for Insulators—Composite-Distribution Line Post Type	ANSI C29.18-2003
American National Standard for Insulators—Composite-Line Post Type	ANSI C29.17-2002
American National Standard for Insulators—Wet-Process Porcelain and Toughened Glass—Suspension Type	ANSI C29.2-1992 (R1999)
American National Standard for Intermediate Metal Conduit (EIMC)	ANSI C80.6-2005
American National Standard for lamp ballasts - Low Frequency Square Wave Electronic Ballasts -- for Metal Halide Lamps	ANSI_ANSLG C82.14-2006
American National Standard for Lamp Ballasts—Fluorescent Adapters	ANSI C82.12-1999
American National Standard for Physical Aspects of Watthour Meters—Safety Standard	ANSI C12.10-2004
American National Standard for Polyphase Induction Motors for Power Generation Stations	ANSI C50.41-2000
American National Standard for Portable Rechargeable Cells and Batteries—General and Specifications	ANSI C18.2M, Part 1-2007
American National Standard For Product Safety Information in Product Manuals, Instructions, and Other Collateral Materials	ANSI Z535.6-2006
American National Standard For Roadway and Area Lighting Equipment—Elliptically Shaped, Enclosed Side-mounted Luminaires for Horizontal-burning High-intensity Discharge Lamps	ANSI C136.14-2004
American National Standard for Roadway and Area Lighting Equipment—Enclosed Setback Luminaires and Directional Floodlights for High-intensity Discharge Lamps	ANSI C136.32-2006
American National Standard for Roadway and Area Lighting Equipment—Enclosed, Post Top-Mounted Luminaires	ANSI C136.16-2004
American National Standard for Roadway and Area Lighting Equipment—Filament Lamps—A Guide for Selection	ANSI C136.1-2004
American National Standard for Roadway and Area Lighting Equipment—Film Cutouts	ANSI C136.5-2003
American National Standard for Roadway and Area Lighting Equipment—Glass Lenses Used in Luminaires	ANSI C136.28-2006
American National Standard for Roadway and Area Lighting Equipment—High-mast Side-mounted Luminaires for Horizontal- or Vertical-burning High-intensity Discharge Lamps	ANSI C136.18-2006
American National Standard for Roadway and Area Lighting Equipment—High-pressure Sodium and Retrofit High-pressure Sodium Lamps for Mercury Ballasts—Guide for Selection	ANSI C136.19-2004
American National Standard for Roadway and Area Lighting Equipment—Internal Labeling of Luminaires	ANSI C136.22-2004
American National Standard for Roadway and Area Lighting Equipment—Locking-type Photocontrol Devices and Mating Receptacles—Physical and Electrical Interchangeability and Testing	ANSI C136.10-2006
American National Standard for Roadway and Area Lighting Equipment—Luminaire Attachments	ANSI C136.3-2005
American National Standard for Roadway and Area Lighting Equipment—Luminaire Voltage Classification	ANSI C136.2-2004
American National Standard for Roadway and Area Lighting Equipment—Mercury Lamps—Guide for Selection	ANSI C136.12-2004
American National Standard for Roadway and Area Lighting Equipment—Metal Brackets for Wood Poles	ANSI C136.13-2004
American National Standard for Roadway and Area Lighting Equipment—Metal Heads and Reflector Assemblies—Mechanical and Optical Interchangeability	ANSI C136.6-2004
American National Standard for Roadway and Area Lighting Equipment—Multiple Sockets	ANSI C136.11-2006
American National Standard for Roadway and Area Lighting Equipment—Nonlocking (Button) Type Photocontrols	ANSI C136.24-2004
American National Standard for Roadway and Area Lighting Equipment—Socket Support Assemblies for Metal Heads—Mechanical Interchangeability	ANSI C136.9-2003
American National Standard for Roadway and Area Lighting Equipment—Trouble-shooting Guide for High-pressure Sodium Luminaires	ANSI C136.26-2003
American National Standard for Roadway and Area Lighting Equipment—Vandal Shields for Roadway and Area Lighting Luminaires	ANSI C136.34-2004
American National Standard for Roadway and Area Lighting Equipment--Enclosed Architectural Luminaires	ANSI C136.23-2006
American National Standard for Roadway and Area Lighting Equipment--Enclosed Side-mounted Luminaires for Horizontal-burning High-intensity Discharge Lamps--Mechanical Interchangeability of Refractors	ANSI C136.17-2005
American National Standard For Roadway and Area Lighting Equipment--High-intensity Discharge and Low-pressure Sodium Lamps in Luminaires--Field Identification	ANSI C136.15-2004
American National Standard for Roadway and Area Lighting Equipment--Tunnel and Underpass Lighting Luminaires	ANSI C136.27-2005
American National Standard for Roadway and Area Lighting—Plug-in Type Receptacle and Plug for High-intensity Discharge Ignitors	ANSI C136.33-2005
American National Standard for Roadway Lighting and Area Lighting Equipment--Vertical Tenons Used with Post Top-mounted Luminaires	ANSI C136.21-2004
American National Standard for Safety Colors	ANSI Z535.1-2006
American National Standard for Steel Electrical Metallic Tubing (EMT)	ANSI C80.3-2005

1 2 3 4 5 6 | next >

	About NEMA	Standards	Products	Media Center	Government	Business & Economy	NEMA Blog